AH-5kw Pitch controlled wind turbine

Introduction of 5kw pitch controlled wind turbine 5kw pitch controlled wind turbine, newly developed by Qingdao Anhua, is a patented product and pioneer in domestic. The self-developed centrifugal pitch controlled mechanism of Wind turbine adjusts blade pitch following wind rotor rotating speed, and keep wind turbine at rated rotating speed. The wind turbine has a stable output power and safe running and is maintenance free. Wind rotor never goes to over speed even encounter to variable wind speed and strong gale. Low wind speed start up, pitch regulation, safe systemCharacteristics: 1. Optimum aerodynamic shape design: high efficiency, low noise. 2. Centrifugal pitch controlled mechanism: 2m/s low wind speed startup; 3-12m/s wind speed, following wind rotor rotate speed to adjust blade angle at optimum TSR, run in high efficiency; over rated wind speed, wind rotor never goes to over speed and has stable control; 3-25m/s wind speed, wind turbine can run smoothly. 3. Direct drive permanent magnet generator, low startup resistance moment, constant running ability of over loading 1.5 times, maintenance free for more than 30000 hour. 4. Safety control: has aerodynamic brake, electric magnet brake, mechanical brake and manual stop mechanism. 5. Sealed slip ring, no cable twist; 6. Streamline design. 7. Long acting anticorrosive treats, no corrosion in 15years. Pitch controlled elementRotating speed change of wind rotor drives the centrifugal pitch control mechanism to adjust blade pitch; wind pressure on wind rotor will reduce, and then wind turbine rotating speed slow down. Close loop control, reliable regulation. Pitch control mechanism is sensitive, reliable, and can be used in variable environments. Wind turbine start up: keep a big blade pitch, start up with 2m/s wind speed; Wind turbine start to run: reduce blade pitch step by step, better for speedup; 4-12m/s wind speed: regulate the optimum blade pitch to keep the max output power of wind turbine; Encountering to strong wind: adjust blade pitch into negative angle to keep rotating speed within limits; Manual stop: operate manual winch to adjust blade pitch into negative angle, blade will lose it aerodynamics, start mechanical brake to stop wind turbine. Technical parameter Wind rotor Diameter (m)5.2Working Voltage (V)DC120V/DC240VAC240Material and number of the bladeReinforced fibber glass*3Battery voltage (V) /Capacity (Ah)120V/200Ah240V/100AhRated power / max power (w)5k/6kSpeed regulation methodPitch controlled + yawing + electromagnet brakeRated wind speed (m/s)11Stop methodBrake by hand dragRated rotate speed (r/min)240Generator styleThree phase, permanent magnetStartup wind speed (m/s)2AA Tower height/weight (m/kg)8/150Working wind speed (m/s)3-25Weight (excluding tower)400Survived wind speed (m/s)60AAA Tower height / weight (m/kg)8/450